Heya, Thanks for visiting!
About: teensy-3
No description...
Tagged Items:
Here is a simple guide/tutorial on how to get your linear servo moving. The video below demos what I made. You can see how everything is set up below that: Watch on YouTube Parts: Teensy 3.0 or 3.1: Substitute your own Arduino/microcontroller Mini Linear Servo 1x 10 uF Capacitor 1x Diode (Optional) Potentiometer for jog code. I was able to run the mini servo off of the Teensy's 3.3V pin which has a 100mA max rating. Code: There are two different demo projects. The first one just jogs the servo back and forth. The second demo uses the potentiometer as input to manually control the position of the servo. A linear servo works just the same as a normal hobby ...
Here is a simple guide to get your stepper motors spinning. The video below demos what I made. You can see how everything is set up below that: Watch on YouTube Parts: Teensy 3.0 or 3.1: Substitute your own Arduino/microcontroller Stepper Motors: 1.7A NEMA 17 4-wire Motor Controllers: I used a 3.5A controller with the TB6560 chips Power Supply: 24V 10A (I used a Sopudar SPD-240-24) Wiring Diagram / Schematic: Code (.ino, arduino code): const int stepperX_pul = 0; const int stepperX_dir = 1; const int stepperY_pul = 2; const int stepperY_dir = 3; int microstep_count = 0; void setup() { // Set up the x axis pinMode(stepperX_pul, OUTPUT); pinMode(stepperX_dir, OUTPUT); // Set up the y axis pinMode(stepperY_pul, OUTPUT); pinMode(stepperY_dir, ...
1